|
Post by Andrew on Nov 20, 2013 8:12:30 GMT
Stumbled on this the other day, the Bob Shock Mod for the Fanatec Clubsport V1 and CSR Elite pedals. I'm going to order the CSR Elites when they come back in stock and I'll buy this at the same time.
|
|
|
Post by scoops on Nov 20, 2013 16:34:02 GMT
Let us know how you get on looks good
|
|
|
Post by cageyh on Nov 20, 2013 16:55:30 GMT
Why did you have to post this? I think I may have just ordered one, as this will basically give me a V2 brake pedal, without too much expense. See, trying to justify it already!
|
|
|
Post by Andrew on Nov 20, 2013 17:29:15 GMT
Scoops, will do Kev I did think you'd get it when I posted it up
|
|
|
Post by cageyh on Nov 20, 2013 17:57:37 GMT
I was looking at a mod from the states, but it had a 3d printed bracket that clipped over the top of the load cell adjuster. I didn't like it, but this metallic bracket looks better designed. By the time I have bought two shocks, and designed and manufactured my bracket, it would cost a fortune, and be next year sometime by the time I had the parts machined.
|
|
|
Post by cageyh on Nov 21, 2013 15:06:38 GMT
Parts are on the way.
|
|
|
Post by Andrew on Nov 27, 2013 16:11:55 GMT
Have you fitted it yet Kev?
|
|
|
Post by cageyh on Nov 27, 2013 16:40:13 GMT
Still not arrived. The package that did was actually windows 7 that I forgot about ordering....
|
|
|
Post by cageyh on Dec 17, 2013 18:18:55 GMT
It's arrived! I'll be spannering later, and will report back once I have it setup.
|
|
|
Post by scoops on Dec 17, 2013 18:22:25 GMT
Can you post a photo of the parts before fitting if poss. I would also be interested in the length of the shock.
Just wondering if I could source parts locally?
|
|
|
Post by brucey on Dec 17, 2013 18:29:04 GMT
That Shock looks like a standard part from a large R/C Buggy Suspension (I.e. MG Marauder) Found this 132mm long shock on e bay:
|
|
|
Post by scoops on Dec 17, 2013 19:34:10 GMT
I think its 110mm? and a Trassax brand just wanted to be sure.
|
|
|
Post by cageyh on Dec 17, 2013 20:16:01 GMT
Oops. Sorry, no. I'll strip the shock off tomorrow. I think a Traxxas or Integy shock will do it, but you need a bracket for the other end near the rotary pot.
|
|
|
Post by cageyh on Dec 17, 2013 20:21:55 GMT
You need something in the region of 105mm to 110mm. Have a look here for another take on the mod - Here
|
|
|
Post by scoops on Dec 17, 2013 20:44:10 GMT
Don't strip it off on my account the measure was the main thing thanks
|
|