|
Post by scoops on Dec 2, 2020 20:12:15 GMT
I’m thinking about changing my brake to a hydraulic brake. I have Derek Speares Design pedals that use Wilwood floor mounted pedals so should be to difficult as they are supposed to be hydraulic anyway.
Won’t happen until the new year at least but might be a fun project.
I known Wrighty has done a mod but this would be full DIY and thinking about using a Leo Bodnar board, a couple of master cylinders, a pull slave cylinder, hydraulic pressure sender and hydraulic tubing to fit.
I know it’s not going to be that simple but am I missing anything?
|
|
|
Post by cageyh on Dec 4, 2020 15:39:34 GMT
Yes, a fluid that resembles brake fluid. Maybe a silicon based brake fluid? DOT4 / DOT5 Brake fluid leaking on your rig would be nasty.
|
|
|
Post by scoops on Dec 4, 2020 16:14:22 GMT
Yeah I did read on a forum about a replacement to brake fluid need to go and find it
|
|
|
Post by cageyh on Dec 7, 2020 16:14:31 GMT
Silicone shock absorber damping oil?
|
|