|
fpsVR
May 14, 2020 19:41:21 GMT
via mobile
Post by scoops on May 14, 2020 19:41:21 GMT
They are in sketch up which is a free 3D design app. You can export from sketch up as an stl file which you can import into the slicer software that You can then use in the printer
|
|
|
fpsVR
May 14, 2020 19:48:48 GMT
Post by Si on May 14, 2020 19:48:48 GMT
This thread feels like it's gone off topic. BTW - If fpsVR fails to load, close SteamVR and re-open it. It should launch with SteamVR
|
|